Wireless Smart Doorbell
This is a multifunctional bell. 39 Songs (including siren sounds), 5 levels of volume. Can be used as a doorbell or as a siren.
Instructions for use:
1. How to pair: There are three buttons on the side of the bell. Press the middle button (about 3 seconds), and the bell LED light will light up for a long time (the bell enters the signal receiving mode). Press the kit's remote control button (sends a signal). Complete pairing.
2. How to delete pairing: There are three buttons on the side of the bell. Press the middle button (about 5-7 seconds), and the bell LED light will flash 3 times quickly. Complete deletion (delete all).
3. Adjust the volume: There are three buttons on the side of the bell. Press the speaker icon button once.
4. How to switch songs: There are three buttons on the side of the bell. Press the button with the music symbol icon to switch to your favorite song, and finally press the remote button of the kit. Complete music switching. (Each matching remote control button can correspond to a song)
5. How to use it as a siren: First switch the song to the siren sound. There are three buttons on the side of the bell. Press the middle button (about 3 seconds) and the bell LED light will light up for a long time (the bell enters the signal receiving mode). Wireless home security products (433MHz series) send out a 433MHz signal to complete pairing. For example: the door sensor is opened and will send out a signal once.
Note: It is not compatible with all wireless home security products on the market. There are several 433MHz codes currently on the market. As a result, some manufacturers' codes cannot be paired with our doorbells. Some products can be paired, but cannot trigger the doorbell. This is because the code is incompatible, not a product problem. This situation: part of the code is the same as my product, and the product can receive the code and respond with a sound.
English
French
